6 quick set up adjustments, 1 quick lens adjustment, 2 using the rcu – Barco iQ Pro G500 User Manual
Page 41: Quick set up adjustments, Quick lens adjustment, Using the rcu
4. Getting started
Image 4-10
The message will dissapear after 2 minutes, it can also be escaped.
The projector will switch to single lamp mode and displays an icon (right top corner of the screen) representing a crossed out lamp,
that way informing the user of an earlier lamp error.
The icon can always be removed via the Clear lamp error function in the Lamp menu.
W
ARNING
:
In case of lamp error contact a Barco authorized technician.
4.6
Quick set up adjustments
Overview
•
•
4.6.1
Quick lens Adjustment
What can be done ?
For a quick lens set up and image shift, use the RCU dedicated keys or the lens button on the local keypad
Zoom/focus are only available for motorized lenses.
Quick zoom/focus adjustment
1. Press LENS ZOOM or
LENS FOCUS on the RCU
2. Use the arrow keys to adjust
Quick shift adjustment
1. Press LENS SHIFT
2. Use the arrow keys to adjust
4.6.2
Using the RCU
Pointing to a reflective screen
1. Point the front of the RCU to the reflective screen surface. (image 4-11)
R5976491 IQ PRO G500 01/02/2007
35