Using a new card (formatting), Using a new card, Formatting) – Olympus D-100 User Manual
Page 24: Operating procedure
Advertising
24
PREPARATION
Using a New Card
(Formatting)
Check that the camera is set to
the playback mode (Page 42) by
pressing the
monitor button.
Before using a non-Olympus card or a card which has been formatted or used with
devices other than this camera (such as a PC), be sure to format the card on this camera.
Operating Procedure
OK/menu button
Arrow pad
1 / 3
SET
OK
SELECT
NO
OFF
NO
NO
1.
Press the
OK/menu button.
[
The monitor shows the playback mode
menu 1/3.
2.
Select
by pressing the
or
arrow pad key.
3.
Select “YES” by pressing the
or
arrow pad key, and then
press the
OK/menu button.
[
The card setup screen is displayed.
SET
OK
NO
OFF
YES
NO
Playback mode menu 1/3 screen
Advertising