Using the flash, Operating procedure – Olympus D-100 User Manual
Page 56
56
ADVANCED SHOOTING FEATURES
Using the Flash
1 / 3
AUTO
OFF
OFF
OFF
END
OK
SELECT
OK/menu button
Arrow pad
1 / 3
AUTO
OFF
OFF
OFF
END
OK
SELECT
AUTO
Check that the lens barrier is
open.
1.
Press the
OK/menu button.
[
The monitor shows the shooting mode
menu 1/3.
2.
Select
by pressing the
or
arrow pad key.
3.
Each time you press the
or
arrow pad key, the flash mode is
switched in the sequence: Auto-
Flash[Red-Eye Reduction Flash
[
Fill-In Flash
[
Night
Scene
[
Flash Off
. Select
one of these modes.
4.
Press the
OK/menu button.
[
The flash mode is set and the shooting
screen re-appears. Now you can shoot
images with the selected flash mode.
The flash has been designed to fire automatically when shooting under low light or
against strong back light. You can change this flash mode according to different
shooting situations.
Operating Procedure
Shooting mode menu 1/3 screen
Shooting mode menu 1/3 screen
ⅷThe flash mode setting menu
can also be displayed by
simply pressing the
arrow
pad key when the lens barrier
is open. The flash mark is
inscribed on the left of the
arrow pad key. The setting
menu disappears after a
moment if no operation is
performed.