Olympus D-100 - Manual (Page 38)

38
BASIC SHOOTING OPERATIONS
2 Monitor
HQ
T
W
When the monitor is turned on by pressing the
monitor button, the information displays on the left are
shown on the monitor.
No. of images that
can be shot
Battery status
Record mode
Flash mode
Drive mode
Self-timer
(Green)
(Red)
Shows the approximate number of images you can shoot.
Remaining battery power is insufficient. (The display goes out automatically.)
The remaining battery power is too low. Replace the batteries with
new ones. Shooting is possible when the batteries are low, but
battery power could run out while the image is being processed.
Shows the quality of the next image to be shot. The default
setting is HQ (High Quality). (
Page 54)
( Page 54)
( Page 54)
The default setting is the Auto-Flash mode, which is not indicated
explicitly. (
Pages 56-57)
Red-Eye Reduction Flash ( Page 57)
Fill-In Flash ( Page 57)
Night Scene ( Page 58)
Flash Off ( Page 58)
Shows that the Continuous Shooting mode is switched on.
(
Page 62) The default setting is the Single-Frame mode,
which is not displayed on the monitor.
Shows that the Self-Timer mode is switched on. ( Page 61)
The default setting is no self-timer.
HQ
SQ
SHQ
Auto
(No display)