Olympus D-100 - Manual (Page 52)

52
VIEWING OR ERASING IMMEDIATELY AFTER SHOOTING
Adjusting the Monitor Brightness
1 / 3
SET OK SELECT
NO
OFF
NO
NO
OK/menu button
Arrow pad
3 / 3
END OK SELECT
SET OK SELECT
You can adjust the brightness of the mon-
itor to make it easier to see when shoot-
ing under daylight or in the dark, as well
as when viewing images on the monitor.
Check that the camera is set to the
Playback mode by holding down
the
monitor button for a moment.
Operating Procedure
1.
Press the OK/menu button.
[ The monitor shows the playback mode
menu 1/3.
2.
Select by pressing the or
arrow pad key.
3.
Adjust to the desired brightness by
pressing the
(+/to brighten) or
(–/to darken) arrow pad key.
4.
Press the OK/menu button.
[ All the images will be displayed at the
set brightness.
ⅷThe brightness setting will be held in memory even after the camera is
turned off.
ⅷThe monitor brightness can also be set from the shooting mode menu.
Press until the
monitor turns on.
Playback mode menu 1/3 screen
Playback mode menu 3/3 screen
Monitor adjustment screen