Erasing pictures (one-frame erase), Operating procedure – Olympus D-100 User Manual
Page 46
46
VIEWING OR ERASING IMMEDIATELY AFTER SHOOTING
Erasing Pictures (One-Frame Erase)
OK/menu button
Arrow pad
1 / 3
SET
OK
SELECT
NO
OFF
NO
NO
Check that the camera is set to the
Playback mode by holding down
the
monitor button for a moment.
You can increase the number of images remaining on a card by erasing
unnecessary images.
Operating Procedure
1.
Display the frame to erase by press-
ing the
or
arrow pad key.
(The frame can also be selected even when
the 4-split or 9-split display is selected.)
2.
Press the
OK/menu button.
[
The monitor shows the playback mode
menu 1/3.
3.
Select
by pressing the
or
arrow pad key.
4.
Select “YES” by pressing the
or
arrow pad key.
5.
Press the
OK/menu button.
[
The selected image is erased.
The orange lamp on the right of the
viewfinder blinks during erasure.
To cancel single-frame erasure:
Select “NO” and press the
OK/menu button.
Once erased, images cannot be
restored. Check each image before
erasing to avoid accidentally
erasing images you want to keep.
3
YES
OFF
NO
Press until the
monitor turns on.