Olympus D-100 - Manual (Page 25)

25
PREPARATION
4.
Select by pressing the or
arrow pad key, and then select “YES”
by pressing the
or arrow pad
key.
To return to the playback mode menu,
select “NO” and press the
OK/menu button.
5.
Press the OK/menu button to
execute formatting.
[ The orange lamp on the left of the
viewfinder blinks and the monitor shows
a bar indicating the processing status.
If you are using an optional
Olympus card, you do not need to
format it.
NO
YES
SET OK SELECT
NO CARD
If the indicator shown on the left
appears on the monitor, the card
needs to be formatted.
ⅷ
Formatting erases all images on the card including those which are
protected. When formatting a previously used card, take care not to erase
necessary image data. Once the card has been formatted, images previously
stored on that card cannot be restored.
ⅷ
A card with a write protect seal attached to it cannot be formatted. Remove the
seal before formatting it. Do not reuse the removed write protect seal.
ⅷ
Once formatting has started, it cannot be canceled midway.
Check the following before formatting
Card setup screen
NO
YES
SET OK