Selecting the flash pattern – Olympus E-100 RS User Manual

Page 106

Advertising
background image

6

106

Selecting the flash pattern

Select a flash mode to match the lighting conditions and the effect you want
to achieve. You can also correct the amount of light using the flash
compensation mode (p.109). To use the external flash, refer to page 112.

When

(flash mode button) is pressed with the flash up, the flash mode

switches as follows. Flash modes are disabled in some recording modes.

[

P. 00

Flash mode/Control panel

Use

Auto-Flash (p. 72)

Automatically fires in low-light and

No display.

backlight conditions.

Red-Eye Reduction

Significantly reduces the

Flash (p. 107)

phenomenon of “red-eye”

(subject’s eyes appearing red).

Fill-In Flash (p. 107)

Fires regardless of available light.

Flash off

The

is displayed whenever the built-in flash is within the camera

housing. You cannot select this mode if the built-in flash is extended.

In the following situation, the flash does not fire even when the flash is
extended.

appears on the control panel.

– Sequential mode

– Shooting with Pre-capture function

– Bracketing

– Movie Recording

Flash working range:
Wide-angle : Approx. 11.8" to 13 ft
Telephoto : Approx. 3.25 ft to 11 ft

Control panel

Advertising