Olympus E-100 RS - Manual (Page 135)

3 Hold a sheet of plain white paper
in front of the lens. Position the
white paper so that it fills the
screen (to ensure there is no
shadow). Focus on the paper, then
press the OK button.
●
To cancel white balance
setting, press (Menu button).
●
Each time the OK button is
pressed, a new white balance
setting is stored.
●
You can take a picture after this
step.
●
WB appears on the control panel.
4 Press (Menu button) to exit
from the white balance setting
screen.
●
When not using the white
balance setting, change the WB
setting.
૽૽
Adjusting the white balance with
colors except white
In step 3, substitute colored paper for
white. The white balance is adjusted
based on the color, changing the tint.
Ex.: Red paper = deeper green, blue
paper = orange, yellow paper = deeper
purple.
135
7 white balance setting screen
Control panel
Manual white balance
3, 4
●
Unless OFF is selected in ALL RESET, the setting will be canceled when
the power is turned off. (P. 00)
●
Be sure to check the color in the Display mode.
Note:
EXIT OK SET