Olympus E-100 RS - Manual (Page 44)

44
1
Selecting the card
Select the card you are using on the menu.
1 Set the Power switch to ON.
2 Press (Menu button).
●
The menu is displayed in the
viewfinder when the Mode dial is
set to the Record mode. The menu
can be displayed on the monitor by
pressing
(Monitor button).
3 Press on the Arrow pad to
select SM/CF, then press .
4 To use SmartMedia, select SM. To
use CompactFlash, select CF.
Press the OK button.
●
Press the OK button again to save
the setting and restore the normal
screen.
૽૽
Changing the card type without
going through the menu:
While pressing down the INFO button,
press the
button. The card type is
changed.
SM
CF
[ 1 / 5 ]
F2.8 1/800 0.0 P
SM/CF
WB
[ SM ]
PRE-CAPTURE
3, 4
2 4
1
Still picture record menu
Control panel
Card
button
INFO button