Olympus E-100 RS - Manual (Page 82)

82
Shooting pictures consecutively at high speed
—Sequential mode
3
Selecting the Sequential mode
Use this mode to take pictures in sequence. When the shutter release button
is held down, the camera will take pictures in sequence. Picture-taking will
stop when you release your finger from the button. The Sequential mode is
not available if the record mode is set to TIFF. Press
to change the
function of this mode. The sequential mode includes:
Single-picture Shooting
: Takes only one picture when you press the
shutter button. (Initial setting) There is no display on the control panel.
Sequential Shooting : Takes pictures in sequence. Focus, brightness
(exposure), and white balance are locked at the first frame. The number
of still pictures that can be stored depends on the selected speed. The
approximate number is shown below.
AF sequential Shooting : Takes pictures in sequence. Focus,
brightness (exposure), and white balance are metered and adjusted in
each frame. The number of still pictures that can be stored depends on
the selected speed. The approximate number is shown below.
Self-timer/remote-control : Takes pictures with the self-timer/remote-
control. See P.119 to 121 for further information.
Auto bracket : Takes pictures in sequence. The number of pictures
can be selected. Brightness (exposure) and/or white balance is metered
in each frame. Focus is locked at the first frame. See P. 000 for further
information.
Record mode Number of still pictures that can be stored
TIFF Not available.
SHQ 00
HQ 00
SQ (640 X 480) 00