Olympus E-100 RS - Manual (Page 111)

111
6
3 Press to select SLOW 1 or
SLOW 2, then press the OK
button.
●
appears on the control
panel.
●
Press the OK button again to store
the setting. The Menu disappears
and the normal screen is restored.
4 Take a picture.
●
When SLOW 2 is selected, the
flash will fire a pre-flash before the
regular flash.
3 4
3
[ 2 / 5 ]
F2.8 1/30 0.0 P
BKT
MULTI
METERING
SLOW OFF
SLOW 1
SLOW 2
[ SM ]
Control panel
Slow shutter
synchronization flash mode
●
It is impossible to select —OFF when the Mode dial is set to S or M.
If the Mode dial is switched to S or M when —OFF has been
selected, SLOW 1 will be set. You can then select from SLOW 1 or SLOW 2.
●
Since a slow shutter speed is automatically selected in this mode, use the
tripod to prevent blurred pictures caused by camera shake.
●
This mode can be used with both the built-in flash and an external flash.
●
Unless OFF is selected in All Reset, the setting will be canceled and reset
to off when the power is turned off (p.148).
Note: