Olympus E-30 - Manual (Page 104)

104
EN
7
Custom
izi
n
g your cam
er
a
FILE NAME
When you take a picture, the camera assigns it a unique file name and saves it in a folder.
File names are assigned as shown in the illustration below.
[AUTO]
Even when a new card is inserted, the folder numbers are retained from the previous
card. If the new card contains an image file whose file number coincides with one saved
on the previous card, the new card’s file numbers start at the number following the
highest number on the previous card.
[RESET]
When a new card is inserted, folder numbers start at 100 and file numbers start at 0001.
If a card containing images is inserted, the file numbers start at the number following the
highest file number on the card.
PRIORITY SET
You can customize the initial position of the cursor ([YES] or [NO]) on the Erasing images or
Formatting the card screen.
dpi SETTING
You can set the resolution for printing images in advance. The set value is recorded on the card
with the images.
[AUTO] Automatically set according to the image size.
[CUSTOM] You can make the desired setting. Press d to display the setting screen.
Custom Menu 1 i K UTILITY
CLEANING MODE gP. 126
EXT. WB DETECT
You can disable the white balance sensor used to determine the light source during auto white
balance. This is useful when the light source near the sensor and the light source illuminating
the subject are different.
All folders Folder name
000 OLYMP
Folder number (100 – 999)
Pmdd0000.jpg
File name
Day
(01 – 31)
Month
(10, 11, 12 are numbered A, B,
C)
Color space
P: sRGB
_: Adobe RGB
File number (0001 – 9999)
After taking 9999 pictures, the counter is
reset to 0001 for the next picture, the
folder number increments by 1 to name
and create a new folder where the next
image (file) is stored.
E-30_MASTER.fm Seite 104 Mittwoch, 3. Dezember 2008 1:56 13