Olympus E-30 - Manual (Page 50)

50
EN
2
Exposur
e
The higher the ISO value, the greater the camera’s light sensitivity and the better its ability to
shoot in low light conditions. However, higher values may give pictures a grainy appearance.
[AUTO] : The sensitivity is set automatically according
to the shooting conditions. For [ISO-AUTO
SET], you can set the default (value normally
used when the optimal exposure can be
obtained) and upper limit (upper limit of ISO
that automatically changes).
g“ISO-AUTO
SET” (P. 100)
[100 – 3200] : Fixed ISO sensitivity. [ISO STEP] can be changed to [1/3EV] or [1EV]. g“ISO
STEP” (P. 100)
Setting display
• 125 and 1250 are displayed in the viewfinder as 120 and 1200, respectively.
Display after setting
To automatically set the optimal ISO in M mode:
j Normally, the AUTO setting is not available in M mode, but you can set it for use in all shooting
modes. g“ISO-AUTO” (P. 100)
ISO sensitivity setting
Direct button
ISO j/k
Super control panel i p: [ISO]
Menu
MENU [W] [ISO]
Viewfinder Control panel
AUTO :
100 :
3200 :
Viewfinder Control panel
When set to [AUTO], ISO-A and the ISO value
determined by the camera are displayed. For all
other settings, ISO and the set value are displayed.
When set to 2000 or a higher value, ISO blinks. When set to a setting other than AUTO, ISO is
displayed. When set to 2000 or a higher value, ISO
blinks.
 TIPS
ISO button
i button
k
MENU button
j
When set to [AUTO], the default value is
displayed.
– – –
E-30_MASTER.fm Seite 50 Mittwoch, 3. Dezember 2008 1:56 13