Olympus E-30 - Manual (Page 49)

49
EN
Exposur
e
2
Compensation value: 0.3, 0.7 or 1.0
• The compensation value will change if the EV step is changed. g“EV STEP” (P. 100)
Number of frames: 3 or 5
Setting display
Start shooting.
• In single-frame shooting, the exposure changes every time the shutter button is pressed.
• In sequential shooting, hold down the shutter button until the selected number of frames are taken.
• Releasing the shutter button stops flash bracketing shooting. When it stops,
0 blinks in the
viewfinder and on the control panel and 0 is displayed in green on the super control panel.
How AE bracketing compensates exposure in each shooting mode
Depending on the selected shooting mode, exposure is compensated in the following way:
P mode : Aperture value and shutter speed
A mode : Shutter speed
S mode : Aperture value
M mode : Shutter speed
To apply AE bracketing to the exposure value you have compensated:
j Compensate the exposure value, then use the AE bracketing feature. AE bracketing is applied to
the exposure value you have compensated.
Direct button G + AF j/k
Menu MENU [X] [AE BKT]
Viewfinder Control panel
 TIPS
Number of
frames
EV STEP
Bracketing
Number of
frames
EV STEP
Compensation range
• The exposure value for the remaining frames blinks
during shooting.
E-30_MASTER.fm Seite 49 Mittwoch, 3. Dezember 2008 1:56 13