Olympus E-30 - Manual (Page 13)

13
EN
Basic guide
Attaching a lens to the camera
Body cap
Lens cap
Alignment mark (Red)
Lens release button
1
Remove the body cap from the camera
and the rear cap from the lens
2
Attach a lens to the camera
• Make sure the power switch is set
to OFF.
• Do not press the lens release
button.
3
Remove the lens cap (3, 4)
Removing the lens from the
camera
While pressing the lens release button (1),
rotate the lens in the direction of the arrow
(2).
• Align the lens attachment mark (red) on
the camera with the alignment mark (red)
on the lens, then insert the lens into the
camera’s body (1).
• Rotate the lens in the direction indicated
by the arrow until you hear it click (2).
Rear cap
Lens attachment mark
(Red)
Pr
ep
ar
at
ions
f
o
r sh
oot
in
g
E-30_MASTER.fm Seite 13 Mittwoch, 3. Dezember 2008 1:56 13