Olympus E-30 - Manual (Page 123)

123
EN
Sh
ooting tip
s
and maintenance
10
Error codes
Viewfinder
indications
Control panel
indications
Monitor
indication
Possible cause Corrective action
Normal
indication
NO CARD
The card is not
inserted, or it
cannot be
recognized. Insert a card or insert a
different card.
CARD ERROR
There is a problem
with the card. Insert the card again. If the
problem persists, format
the card. If the card cannot
be formatted, it cannot be
used.
WRITE PROTECT
Writing to the card
is prohibited. The card has been set to
read-only setting with the
computer.
Reset the card with the
computer.
CARD FULL
The card is full. No
more pictures can
be taken or no
more information
such as print
reservation can be
recorded.
Replace the card or erase
unwanted pictures.
Before erasing, download
important images to a PC.
No indication No indication
CARD FULL
There is no space
in the card and
print reservation or
new images cannot
be recorded. Replace the card or erase
unwanted pictures.
Before erasing, download
important images to a PC.
No indication No indication
xD-Picture Cards
cannot be read or
is not formatted.
• Select [xD CARD
CLEAN], press the i
button and turn off the
camera. Remove the card
and wipe dry the metallic
surface with a soft, dry
cloth.
• Select [FORMAT]
[YES], and then press the
i button to format the
card. Formatting the card
erases all data on the
card.
No indication No indication
NO PICTURE
There are no
pictures on the
card. The card contains no
pictures.
Record pictures and play
back.
E-30_MASTER.fm Seite 123 Mittwoch, 3. Dezember 2008 1:56 13