Olympus E-30 - Manual (Page 85)

85
EN
Pla
y
back functi
ons
6
This allows you to display detailed information about the image.
Luminance information can also be displayed with histogram
and highlight graphs.
Press the INFO button repeatedly until the desired
information is displayed. You can also switch the
information displayed by turning the dial while pressing the
INFO button.
• This setting is stored and will be shown the next time the
information display is called up.
To quickly switch to the frequently used display:
j You can hide the information display for all modes except “Simplified display”. g“INFO
SETTING” (P. 99)
Information display
 TIPS
INFO button
[4032x3024,1/8] [4032x3024,1/8]
x10 x10
2009.03.16 2009.03.16 21:56 21:56
100-0015 100-0015
15 15
x10 x10
N
SHADOW HILIGHT
L N N
x10 x10
100-0015
+2.0 +2.0 +2.0 +2.0
100 100
WBAUTO WBAUTO G±0 G±0
sRGB sRGB
±0.0 ±0.0
A±0 A±0
±1.0 ±1.0
ISO ISO 45mm 45mm
F5.6 F5.6 250 250
15
NATURAL NATURAL
L N N
15 15
x10 x10
15 15
Highlight/
Shadow display
Image only Simplified display
Highlight&Shadow Histogram display
Histogram *
Shooting
information
Distribution of the brightness
of the recorded image is
displayed in a histogram
(brightness component graph). Over- or underexposed parts of the recorded image are displayed.
Highlights (overexposed) parts will be shown in red.
Shadows (underexposed) parts will be shown in blue.
*Histogram
If the bars in the histogram are higher on the
right, the image may be too bright. If the
bars are higher on the left, the image may
be too dark. Compensate the exposure or
shoot again.
Overall
display
E-30_MASTER.fm Seite 85 Mittwoch, 3. Dezember 2008 1:56 13