Olympus E-30 - Manual (Page 82)

82
EN
6
Pla
y
back functi
ons
6
Playback functions
The basic procedure for viewing pictures are as shown below.
However, before using any of these functions, follow Step 1 below. You can set the camera to
automatically switch to single-frame playback mode after shooting.
g“REC VIEW” (P. 108)
1
Press the q button (Single-frame playback).
• The last recorded image appears.
• The LCD monitor turns off after more than 1 minute if no
operations are performed. The camera will turn off
automatically if there is no operation after 4 hours. Turn on
the camera again.
2
Use p to select images you want to view. You can
also turn the dial to switch to U for close-up
playback.
Single-frame/Close-up playback
q button
INFO button
p
< button
j
15 15 15
[4032x3024,1/8] [4032x3024,1/8]
2009.03.16 2009.03.16 21:56 21:56
100-0015 100-0015
15 15
L N N
Press p to change the
close-up position.
Press p to move the display
of the close-up position.
When [g FACE DETECT]
(
gP. 38) is set to [ON], a
frame is displayed around a
detected face. Press
i to
move the frame to another
face.
Press bd to view frame-by-
frame close-ups.
When [g FACE DETECT]
is set to [ON], press
ac
to move to another face in
close-up position.
• Press the
INFO button to
return to close-up
playback.
(Single-frame) (Close-up playback)
Press the INFO button
a : Displays the frame that is stored
10 frames back
c : Displays the frame that is stored
10 frames ahead
d : Displays the next frame
b : Displays the previous frame
(Close-up position playback)
Press the INFO button
(Close-up frame-by-frame playback)
• To exit the playback mode, press the
q button again.
• Pressing the shutter button halfway
resumes the shooting mode.
Press the < button
• Plays back the image at a 10x
magnified close-up position.
U
G
E-30_MASTER.fm Seite 82 Mittwoch, 3. Dezember 2008 1:56 13