Barco R9010570 - Manual (Page 13)

3. Installation
Image 3-3
Note: In case of a motorized lens the female jack must be in front of the male jack located in the upper-left part of the housing
in the projector
3. Push carefully to lock the lens in the housing
3.3 Removing the lens
How to remove the lens ?
1. Unlock the lens by pulling the handle located on the right side of the projector
Image 3-4
Image 3-5
location of the lens handle
2. Remove the lens out of its housing
C AUTION : Never transport the projector with the lens mounted on it !
Always remove the lens before transporting the projector.
3.4 Lens range
Overview table
Lens Partnumber
QCLD (0.85:1) R9849860
QCLD (1.1-1.3:1) R9849850
CLD (1.2-1.6:1) R9849870
R59770079 BARCO ID H250/500 23/07/2007 9