Barco R9010570 - Manual (Page 57)

7. Advanced
On the screen appears now a slider box
Image 7-22
8. Use ←or → , the numeric keys on the remote, or the keypad to change the Noise Reduction
7.5.2 Aspect ratio
Aspect ratios
The standard aspect ratio used in broadcast television is the 4:3 ratio. However, most of the DVD sources use nowadays the wide
screen 16:9 or even the Cinemascope
TM 2.35:1 aspect ratio.
Some DVD sources may even use the anamorphic 16:9 or anamorphic 2.35:1 to take advantage of the higher vertical resolution
offered by the 4:3 ratio. The “anamorphic” term means that the original wide screen image is squeezed in order to fit the 4:3 aspect
ratio.
4:3 16:9 2.35:1
Image 7-23
Common non- anamorphic aspect ratios in DVD sources
16:9 2.35:1
Image 7-24
Anamorphic aspect ratios in DVD sources
What can be done ?
The aspect ratio setting forces the projector to project an image using a defined aspect ratio :
• 4:3
• 16:9
• 5:4
• Auto
The settings do not refer to the aspect ratio of the source !
R59770079 BARCO ID H250/500 23/07/2007 53