Barco R9010570 - Manual (Page 85)

7. Advanced
The Dynacolor dialog box will be displayed.
Image 7-82
5. Push the cursor key ← or → select enable/disable and then ENTER.
Dynacolor™ g (Light Output) Value
The value g in the Dynacolor™ interface represents a relative light output.
g=1 is the maximum available light output.
Assume we have a projector. L=1 in the Dynacolor™ interface will correspond with a ’maximum full white
light’ output of x Lumens.
R59770079 BARCO ID H250/500 23/07/2007 81