Barco R9010570 - Manual (Page 69)

7. Advanced
When switching from the dual mode to the single mode the lamp with the longest runtime is switched off.
If the runtimes are equal (if the projector has always been operated in dual mode) then lamp 1 is switched out.
When switching to single mode, returning to the dual mode will not be possible in the first 60 seconds, Dual in
the menu is greyed out and the LED is flickering, showing that hot restrike (restart) of the lamp is impossible
during that time laps (60 sec).
7.6.3 History
How to view the history ?
1. Press MENU to activate the Tool bar
2. Press → to select the Lamp item
3. Press ↓ to Pull down the Lamp menu
4. Use ↑ or ↓ to select History
Image 7-49
5. Press ENTER
A text box is displayed
Image 7-50
7.6.4 Reset lamp Runtime
When to reset the lamp runtime ?
Reset the lamp runtime whenever you replace a lamp
W ARNING : Lamp runtime reset as well as the lamp replacement can only be done by a Barco authorized
technician.
R59770079 BARCO ID H250/500 23/07/2007 65