Barco R9010570 - Manual (Page 93)

7. Advanced
3. Press ↓ to Pull down the Display setup menu
4. Use ↑ or ↓ to select Status bar position
Image 7-93
5. Press ENTER
6. Use ↑ or ↓ to position the status bar
7.8.7 Sliderbox position
What can be done ?
The slider box can be displayed anywhere on the screen, the position can be set in this menu.
How to reposition the slider box?
1. Press MENU to activate the Tool bar
2. Press → to select the Display setup item
3. Press ↓ to Pull down the Display setup menu
4. Use ↑ or ↓ to select Slider box position
Image 7-94
5. Press ENTER
A slider box is displayed. Use the 4 arrow keys to drag the box to the desired position.
There is a coarse and a fine adjustment of the position, use ENTER (when slider box is displayed) to switch
between the two.
R59770079 BARCO ID H250/500 23/07/2007 89