Toshiba Magnia 7010 - Manual (Page 26)

Getting Started
Front with doors open 10
Default settings are displayed as MAGNIA 7010. You can use a tool to
change what is displayed. Refer to “Using the Sensor Data and LCD Setup
tool” on page 106.
3 Fault information
The messages that may be displayed when a malfunction occurs are listed
below.
For the FAN number and power supply number designations, see the
diagram shown below.
MAGNIA 7010
Messages Meaning Note
SYS FAN Failure
FAN#n on Unit#1
Failure of Standard FAN’s FAN n. n = FAN No
(1 ... 5)
SYS FAN Failure
FAN#n on Unit#2
Failure of Redundant FAN’s FAN n. n = FAN No
(1 ... 5)
CPU FAN Failure
CPU FAN#n
Failure of CPU FAN n. n = FAN No
(1 ... 2)
FAN Degraded to
Non-Redundant
Failure of redundant FAN which has
become non-redundant.
Fan Unit
Degraded Non-
Redundant
The quantity of FAN units decreased and
they have become non-redundant.
SYS FAN Failure
No FAN Unit
Without FAN Unit
PS Failure Power
Supply #n
Failure of power supply n. n = PS No
(1 ... 4)
PS Degraded to
Non-Redundant
Failure of redundant power supply which
has become non-redundant.
Excessive Number
of PS Installed
The number of power supply units is
excessive.
Insufficient #
of PS Installed
The number of power supply units is
insufficient.
DC Short in
Drive Subsystem!
DC shorted in 5" device bay HDD.
DC Short on
Motherboard!
DC shorted on system board.