Toshiba Magnia 7010 - Manual (Page 88)

Installing Hardware
Adding or removing a power supply 72
Removing a power supply
1 Unscrew the power supply from the server chassis.
Removing the power supply
2 Disengage the power supply by pulling the release lever.
3 Use the handle to pull the power supply out of the server cabinet.
Adding a power supply
1 Turn off the power. Make sure all indicators are out.
2 Disconnect all cables, including the power cable.
3 Hold the power supply in both hands and insert it into the slot.
NOTE: The power supply in the bottom power supply bay installs upside
down from the two on the top.
4 Press to ensure a firm connection and push up the release lever.
5 Turn the thumbscrew clockwise to secure it. For the minimum and
maximum power supply information, see “Power supply requirements” on
page 71.
Locking screw
Handle
Release lever