Toshiba Magnia 7010 - Manual (Page 77)

Installing Hardware
Installing a second HDD cage
61
12 Rebuild the disk array (if the RAID controller is installed). For details, refer
to the appropriate RAID manual.
NOTE: The disk array cannot be rebuilt if Power Console (for Windows NT)
or MegaRAID
® Manager (for NetWare ® ) is not installed.
Installing a second HDD cage
The Magnia7010 server comes with a HDD cage capable of holding up to six
disk devices. A second HDD cage may be installed to provide slots for an
additional six HDD devices.
NOTE: This procedure only installs the cage. You also need to install disk
drive units.
1 If the server is running, shut it down, set the AC switch on the back of the
server to OFF, and unplug the power cable.
2 Remove the server cover. For more information, see “Removing and
replacing the server panels” on page 19.
3 Remove the six screws securing the front frame and remove the frame.
4 Remove the four screws securing the dust cover plate and remove it.
Front frame