Toshiba Magnia 7010 - Manual (Page 35)

Getting Started
Removing and replacing the server panels
19
Removing and replacing the server panels
To service the components inside the server, you must remove the side and top
panels.
Removing the panels on the pedestal model
1 Switch off the server, turn off the AC power switch and unplug its power
cable.
2 To release the side panel, turn the lock on the left side of the front panel so
that its finger grip is horizontal.
3 Slide the left panel back until it stops (about 2.5 inches) and lift off the
panel.
Removing the side panel
4 Pull the top cover back about one inch and lift it away.
Removing the top panel
Removing the covers - rack model
1 Switch off the server, turn off the AC power switch and unplug its power
cable.
2 Disconnect any monitor and keyboard cables, as appropriate.
3 Loosen the two thumbscrews.
Panel lock