Toshiba Magnia Z300 - Manual (Page 100)

3. The access authority for the entered community name is set to "READ ONLY." When changing it to "READ
WRITE," select the entered community name and select the "READ WRITE" radio button at right.
4. Lastly, press the [Apply] button to change the setting.
Notice
The SNMP setup page is used to update the setup page but not to change the settings during operation. This is to avoid
affecting the service that the SNMP agent is using on a non-wireless LAN because when a change is reflected, the SNMP
agent (snmpd) shuts down temporarily. To reflect the change, log in as root and manually execute the following command.
# /etc/rc.d/init.d/snmpd restart
You can achieve similar effects by restarting the active OS with the following command. However,
other services (such as HTTPD, FTPD etc.) are not available during a restart either, so use the
above method as much as possible.
# reboot
Notice
When the command is executed, the network shuts down temporarily as explained above; therefore, the service of using the
SNMP agent including the wireless LAN may become abnormal. Before executing the command, fully check the operation
status of other network services. For information on executing the command, consult your server administrator.
92