Toshiba Magnia Z300 - Manual (Page 40)

12. When the upgrade of the driver files is completed, the following screen is displayed.
Push the [Finish]button.
13. The following screen is displayed. Reboot the system.
14. Activate the [Add/Remove Programs] icon on the Control Panel. Remove the MAGNIA Software
Access Point.
15. Activate Setup.exe in the \Public\LAN\Toshiba\TSAP\AP on the Server Setup Tool installation
CD. Subsequently, follow the installer’s instructions.
16. Set up the required items in the Access Point Configuration Utility.
[3.2 Access Point Configuration Utility (Local)]
17. Select the wired LAN network that you want to connect to in the Wired LAN Selection Utility.
[3.4 Wired LAN Selection Utility]
32