Toshiba Magnia Z300 - Manual (Page 24)

Memo
Some protocol components, such as NWLink protocol, demand a setup like a TCP/IP protocol.
Please perform and continue a required setup similarly.
5. When the installation is completed, the following screen is displayed. Reboot the system.
6. Set up the required items in the Access Point Configuration Utility. By default, WEP and MAC
address filtering are enabled.
[3.2 Access Point Configuration Utility (Local)]
Select the wired LAN network that you want to connect to in the Wired LAN Selection Utility.
[3.4 Wired LAN Selection Utility]
16