Toshiba Magnia Z300 - Manual (Page 99)

[For Linux]
In order to communicate with an Access Point Configuration Utility (the Windows version), it is necessary to install SNMP
Agent. Please read the manual of "MAGNIA Z300/Z310 Linux Install CD" for further information.
The settings for communication with the Access Point Configuration Utility are as follows.
1. Access the following URL from the WEB browser.
http://(server IP address)/tsb/tsb_snmp.cgi
Then, the following setup page is displayed.
Memo
As explained above, you need authenticate before accessing this page.
Memo
The setup page can be accessed using the above URL, assuming that the WEB server (apache), is operating
without any setting changes. If the WEB server's settings have been changed, an access failure or abnormal
operation may occur. For the WEB server settings, consult your server administrator
2. Enter a community name in the text box at the left of [Community name] and press the [Add] button. This
community name is used to connect the Access Point Configuration Utility to the server (access point).
91