Toshiba Magnia Z300 - Manual (Page 73)

[Details setup] page
Item Explanation
[Multicast rate]
Specifies the transmission rate of multicast packets sent from the
access point.
Select 1, 2, 5.5, or 11 Mbps.
The default is 2 Mbps.
[Distance between
Access Points]
Specifies the size of the area covered by access points.
Select “Large,” “Medium,” or “Small.”
The default is “Large.”
[DTIM Period]
DTIM is an acronym of Delivery Traffic Indication Map. The send
timing of multicast packets sent from the access point can be
adjusted.
When the value is 1 (normal), a multicast packet is sent at every
beacon. When the value is 3, multicast packets are
accumulated in the buffer and sent every third beacon.
Although a value from 1 to 65535 can be specified, it is
recommended to set 1 for normal operation.
The default is 1.
[Apply] button Ends up saving the selected item.
[Reset] button Ends up without saving the selected item.
65