Toshiba Magnia Z300 - Manual (Page 23)

3. On this screen, select the components to be installed.
Press the [Next] button to start to copy the files.
Memo
The SNMP Extension Agent is required to set up access point information from the remote system, using the
Access Point Configuration Utility.
[3.3 Access Point Configuration Utility]
[Appendix 1 SNMP Settings]
To install the SNMP Extension Agent, the SNMP service must be installed in advance. The SNMP service is
provided by the Operating System. For details, refer to the Operating System manual or online Help.
4. When the TCP/IP protocol is installed, the following screen is displayed during the installation.
Set the IP address and press the [OK] button.
15