Toshiba Tecra S3 - Manual (Page 167)

User’s Manual 8-15
Optional Devices
3. Close the lid and slid the lock to the lock position.
Closing the lid
For details on inserting the Ultra Slim Bay HDD adaptor in the computer’s
Ultra Slim Bay slot, refer to Chapter 4, Operating Basics .
USB floppy disk drive
The USB floppy disk drive module can be connected to the USB port.
For details on connecting the USB floppy disk drive module, refer to
Chapter 4, Operating Basics .
External monitor
An external analog monitor can be connected to the external monitor port
on the computer. The computer supports XGA and Super XGA video
modes. To connect a monitor, follow the steps below.
1. Turn the computer’s power off.
2. Connect the monitor cable to the external monitor port and tighten the
screws on the left and right hand side.
Connecting the monitor cable to the external monitor port
Lid
External
monitor port Monitor cable