Toshiba Tecra S3 User Manual

Page 73

Advertising
background image

User’s Manual

4-5

Operating Basics

Observe the following to improve the fingerprint recognition success rate.

Enroll two or more fingers.

Enroll additional fingers if recognition failure occurs often using enrolled

fingers.

Check your finger condition. Changed conditions, such as injured,

rough, extremely dry, wet, soiled, dirty, oily, soaked, swollen fingers,

may lower the recognition success rate. Also if the fingerprint is worn

down or the finger becomes thinner or fatter, the recognition success

rate may be lowered.

The fingerprint for each finger is different and unique. Please ensure

that only the registered or enrolled fingerprint or fingerprints are used

for identification.

Please be careful of the way the finger is placed.

Please place the finger parallel to the sensor.

Please align the finger in the center of the sensor.

Please place the finger so that the first joint is within the sensor area.

When swiping, please do it slowly and at a constant speed. If this does

not improve the authentication rate, please adjust the speed.

Fingerprint Sensor Limitations.

The fingerprint sensor compares and analyzes the unique

characteristics in a fingerprint.

A warning message will be displayed when recognition is abnormal or

recognition is not successful within a fixed duration.

The recognition success rate may differ from user to user.

Toshiba does not guarantee that this fingerprint recognition technology

will be error-free.

Toshiba does not guarantee that the fingerprint sensor will recognize

the enrolled user or accurately screen out unauthorized users at all

times. Toshiba is not liable for any failure or damage that might arise out

of the use of this fingerprint recognition software or utility.

The following illustrations show the correct way to slide your finger over the

recognition sensor.

The fingerprint authentication uses the same Windows logon ID and

password. If the Windows logon password has not been setup, please do

so before registration.

Advertising