Toshiba Tecra S3 - Manual (Page 61)

User’s Manual 3-9
Getting Started
Opening the LCD display panel
Turning on the power
This section describes how to turn on the power.
The Power button LED indicates the status. Refer to the
Power indicators
section in Chapter 6, Power and Power-Up Modes .
3. Open the computer’s LCD display panel.
4. Press and hold the computer’s power button for two or three seconds.
Turning on the power
Display latch
LCD display panel
■ After you turn on the power for the first time, do not turn it off until you
have set up the operating system. Refer to the section Starting up for
the first time .
■ If the USB floppy disk drive is connected, make sure it is empty. If a
floppy disk is in the drive, press the eject button and remove the floppy
disk.
Power button