Toshiba Tecra S3 - Manual (Page 98)

4-30 User’s Manual
Operating Basics
2. Before recording the video to DVD
■ When you record to DVD discs, please use only media
recommended by TOSHIBA.
■ Do not set the working drive to a slow device like a USB 1.1 hard
disk drive or it will fail to write the DVD.
■ Do not perform any of the following actions:
■ Operate the computer for any other function, including using a
mouse or Touch Pad or closing/opening the LCD panel.
■ Bump or cause vibration to the computer.
■ Use the Mode control button and Audio/Video control button to
reproduce music or voice.
■ Open the optical media drive.
■ Install, remove or connect external devices, including the
following: PC card, SD card, ExpressCard, USB devices,
external monitor, i.LINK devices, optical digital devices.
■ Please verify your disc after recording important data.
■ DVD-R/+R/-RW discs cannot be written in VR format.
■ WinDVD Creator cannot export to DVD-Audio, VideoCD or miniDVD
format.
■ WinDVD Creator can write DVD-RAM/+RW in VR format, but the
disc may only play on your computer.
■ When writing to a DVD disc, WinDVD Creator requires 2GB or more
of disk space for every one hour of video.
■ When you make a fully recorded DVD, the chapter sequence may
not play correctly.
3. About Disc Manager
■ WinDVD Creator can edit one play list on a disc.
■ WinDVD Creator might show a different thumbnail than you
previously set in CE (Consumer Electronics) DVD-RAM recorder.
■ Using the Disc Manager, you can edit DVD-VR format on
DVD-RAM, DVD+VR format on DVD+RW, and DVD-Video format
on DVD-RW.
4. About recorded DVDs
■ Some DVD-ROM drives for personal computers or other DVD
players may not be able to read DVD-R/+R/-RW/+RW/-RAM discs.
■ When playing your recorded disc on your computer, please use the
WinDVD software application.
■ If you use an over-used rewritable disc, the full formatting might be
locked. Please use a brand new disc.