Toshiba Tecra S3 - Manual (Page 84)

4-16 User’s Manual
Operating Basics
Using optical media drives
The full-size drive provides high-performance execution of
CD/DVD-ROM-based programs. You can run either 12 cm (4.72") or
8 cm (3.15") CD/DVDs without an adaptor. An ATAPI interface controller is
used for CD/DVD-ROM operation. When the computer is accessing a
CD/DVD-ROM, an indicator on the drive glows and the Ultra Slim Bay
indicator glows.
If you have a DVD-ROM&CD-R/RW drive, refer also to the Writing CDs on
DVD-ROM&CD-R/RW drive section for precautions on writing to CDs.
If you have a DVD Super Multi drive, refer also to the Writing CD/DVDs on
DVD Super Multi drive section for precautions on writing to CDs/DVDs.
Loading discs
To load CD/DVDs, follow the steps below.
1. When the computer’s power is on, press the eject button to open the
disc tray slightly.
Pressing the eject button
2. Grasp the disc tray gently and pull until it is fully opened.
Use the WinDVD application to view DVD-Video discs.
When the power of the optical media drive is off, pressing the Fn + Tab
keys will turn the power of the optical media drive on. Furthermore, it is
possible to set it to turn the power of the optical media drive on and eject
the tray at the same time.
Eject button