Toshiba Magnia 3100 - Manual (Page 24)

18 Setup
Update Driver Settings (Windows 2000 Quick Installation)
Update Driver Settings
After the network settings screen, the Update Driver Settings screen appears.
Update Driver Settings screen
SCSI Driver
Driver for SCSI controller
RAID Controller Driver
Driver for RAID controller (if the MR493 or the MR475 RAID Controller is not installed on your
computer, this item will be grayed out.)
NOTE: The drivers for the server hardware are on the Server Setup TooL CD-ROM. You may, however,
have installed equipment that was shipped with newer drivers on diskettes. If you need to use the
drivers on diskettes, continue with this section. If you wish to use the drivers from the CD-ROM,
proceed to the next step by clicking [NEXT].
NOTE: If you select the "SCSI Driver” or the “RAID Controller Driver”, the list of devices will be shown
on the screen, after setting the driver diskette. You must select correctly one of the devices from the
list. Refer to the MAGNIA3100 user’s guide and the MegaRAID User’s Manual for information about
the device name.