Toshiba Magnia 3100 User Manual
Page 69
61
HW Diagnostics
CD-ROM TEST
[10. CD-ROM TEST]
To test the computer's CD-ROM functions,
insert the SST CD-ROM for the test.
[01. Sequential address read]
This subtest is a sequential reading of one block unit of all the logical addresses.
[02. Random address read]
This subtest reads data at random addresses.
For the error log information of CD-ROM test, the definition of ERROR NAME and STS are
same as SCSI HDD test, but DETAILS is different from SCSI HDD test.
For the definition of ERROR NAME and STS, refer to the table [SCSI HDD TEST (HDD)] in
[Chapter 4 - 06.SCSI HDD TEST].
For the definition of Details, refer to following description:
*Definition of CD-ROM TEST Details Information (DETAILS=XXXXXXXXXXXXXX)
AAA BB CC DD EE FF GG
AAA
: Case
of
IDE
CD-ROM
device
PrM (Primary, Master)
PrS
(Primary, Slave)
ScM (Secondary, Master)
ScS
(Secondary, Slave)
BB
: Sense
data
(0
byte)
CC
: Sense
data
(1
byte)
DD
:
Sense data (2 byte) [Sense Key]
EE
:
Sense data (12 byte) [Expansion Sense code]
FF
:
Sense data (13 byte) [Expansion Sense code]
GG
:
Sense data (14 byte)
NOTE: On the MAGNIA3100, the CD-ROM test tests only one IDE CD-ROM drive.
The CD-ROM test searches for CD-ROM device, according to the order as shown below, and tests the first
found CD-ROM device only.
IDE (PrM, PrS, ScM, ScS), SCSI (ID0, ID1,
)