Toshiba Magnia 3100 - Manual (Page 40)

34 Setup
Setup Option (Windows NT 4.0 Quick Installation)
Setup Option
After you have specified the installation options for Services and Application (if the MR493, the MR475 or
the MR466 RAID Controller exists) or Update Driver Settings (if the MR493, the MR475 or the MR466
RAID Controller does not exist), the Setup Option screen appears. Use this screen to specify the setup
installation features that you want enabled during the installation process.
Setup Option screen
Select any of the following features that you want to activate:
Beep sound in case of disk change
Sounds an audible alert (beep) to change storage media (CD-ROM and diskette).
Start installation according to parameter settings at boot time
The next time the SST starts, installation automatically begins after a confirmation message, using the
configuration information currently stored on the Startup Disk.
If the necessary devices have not been
installed yet, their device drivers will not be installed. If this option is not selected, the SST starts
normally at the Main Menu.
Confirm partition information during installation procedure
A dialog box appears requiring you to confirm the deletion of the existing partition.
If a disk partition already exists, a confirmation message appears asking if you want to delete the partition.
If this option is not checked, setup deletes the partition without prompting you for confirmation.
NOTE: If you have an existing partition (such as Windows 2000, Windows NT or NetWare), the
partition is deleted first before installation.