Toshiba Magnia 3100 - Manual (Page 61)

53 HW Diagnostics
Execution of Test
Execution of Test
During DIAGNOSTIC TEST and RUNNING TEST, the following screen appears:
Sample screen during the test
XXX TEST
Indicates the name of the test being executed.
SUB-TEST
Indicates the subtest number, and the step number of the test being executed.
ERROR COUNT
Indicates the error count of the test.
PASS COUNT
Indicates the pass count of the test.
WRITE DATA
Indicates the write-data.
READ DATA
Indicates the read-data.
ADDRESS
Indicates the address of the test being executed.
STATUS
Indicates the status of the test being executed.
If any error occurs during the test, the message "ERROR OCCURRED!" is displayed. The error
name is also displayed under the message "ADDRESS".