Toshiba Magnia 3100 - Manual (Page 8)

3 Server Setup TooL
Starting the server
8. After the Server Setup TooL Start-up screen, the Input Locale screen appears.
Input Locale screen
Select one of the following keyboard layouts.
Ӎ Belgian French
Ӎ French
Ӎ German
Ӎ Spanish
Ӎ Swiss French
Ӎ Swiss German
Ӎ United Kingdom
Ӎ U.S.
NOTE: The Input Locale screen only appears when you start SST from the Startup Disk for the first
time. The Locale information you select will be recorded on the Startup Disk. Once recorded, the Input
Locale screen never appears when you start SST from the Startup Disk.
NOTE: To reconfigure the locale setting, you must record the locale setting on the Startup Disk by
procedure (1) or (2) listed below. Then, you can reinstall Windows 2000 Server / Windows NT Server
4.0 using SST automatic installation procedure.
(1) Create Startup Disk from [Utilities-Create Floppy Disks] and start SST on the server from the
Startup Disk and select locale setting.
(2) Start SST on another system and select locale setting, and then select [Utilities-Setup
Information] and click [Save] on the Confirm Parameter Settings screen. The locale setting will
be recorded on the Startup Disk. Start SST on the server from the Startup Disk.