Toshiba Qosmio G10 - Manual (Page 132)

User’s Manual 7-2
HW Setup
Setup
This field displays BIOS Version and date.
Display
This tab lets you customize your computer’s display settings for either the
internal LCD screen or for an external monitor.
Power On Display
Lets you select which display will be used when the computer is booted.
Boot Priority
*There are two types of models: one with one hard disk drive and the other
with two hard disk drives. Setting options may vary depending on the
model.
Boot Priority Options
This option sets the priority for booting the computer. Select from the
following settings:
Please note that 'HDD' herein refers to the Built-in HDD setting as defined
in the HDD Priority Option."
Auto-Selected Selects an external monitor if one is connected.
Otherwise, it selects the internal LCD (Default).
LCD + Analog RGB Selects both the internal LCD and external
monitor for simultaneous display.
HDD
−> FDD −> CD-
ROM
−> LAN
The computer looks for bootable files in the
following order: HDD, floppy disk drive, CD-ROM
and LAN. (Default)
FDD
−> HDD −> CD-
ROM
−> LAN
The computer looks for bootable files in the
following order: floppy disk drive, HDD, CD-ROM
and LAN.
HDD
−> CD-ROM −>
LAN
−> FDD
The computer looks for bootable files in the
following order: HDD, CD-ROM, LAN and floppy
disk drive.
FDD
−> CD-ROM −>
LAN
−> HDD
The computer looks for bootable files in the
following order: floppy disk drive, CD-ROM, LAN
and HDD.
CD-ROM
−> LAN −>
HDD
−> FDD
The computer looks for bootable files in the
following order: CD-ROM, LAN, HDD, floppy disk
drive.
CD-ROM
−> LAN −>
FDD
−> HDD
The computer looks for bootable files in the
following order: CD-ROM, LAN, floppy disk drive
and HDD.