Toshiba Qosmio G10 - Manual (Page 172)

User’s Manual 9-13
Optional Devices
Battery charger
The battery charger provides a convenient way to charge battery packs
without requiring the use of your computer. The battery charger holds up to
two lithium ion battery packs.
USB floppy disk drive
The USB floppy disk drive module can be connected to the USB port. For
details on connecting the USB floppy disk drive module, refer to Chapter 4,
Operating Basics .
External monitor
An external analog monitor can be connected to the external monitor port
on the computer. The computer supports VGA and Super VGA video
modes. To connect a monitor, follow the steps below.
1. Turn the computer off.
2. Connect the monitor cable to the external monitor port.
3. Turn the monitor’s power on.
4. Turn the computer on.
When you turn on the power, the computer automatically recognizes the
monitor and determines whether it is color or monochrome.
To change the display settings, press Fn + F5. If you disconnect the
monitor before you turn the computer off, be sure to press Fn + F5 to switch
to the internal display. Refer to Chapter 5,
The Keyboard , for details on
using hot keys to change the display setting.
TV
The S-Video or D-Video data on your computer can be viewed on a TV set.
To do so, connect your computer’s S-Video out port to the TV using the S-
Video out cable, or your computer’s D-Video out port to the TV using the D-
Video out cable.
You can use the hotkeys Fn + F5 to change the display device. Refer to
Chapter 5,
The Keyboard .