Toshiba Qosmio G10 - Manual (Page 54)

User’s Manual 2-6
The Grand Tour
Monitor-in port Used for displaying video from your digital
camcorder or video recorder on the internal LCD.
This port can be used also as a line-in port to
enable the connection of a stereo device for
audio input. Refer to the
Monitor-in section in
Chapter 9, Optical Devices.
TV antenna port A TV antenna port is provided with some models.
Connect the antenna adaptor to this port to either
watch or record TV programs on the computer,
depending on the TV Software you use.
S-Video-in port A camcorder or other similar device can be
connected to your computer via the S-Video-in
port to allow video data to be imported to the
computer. Refer to the
S-Video-in section in
Chapter 9, Optical Devices.
Universal
Serial Bus
(USB 2.0) port Two Universal Serial Bus ports are located on the
backside. Refer to
Backside section, for details.
These USB ports are located near the cooling vents which can get very
hot during use. You are advised to check the guaranteed operating
temperatures of your USB device should you place it close to these areas
– if you are in any doubt you should look to locate it away from the
computer by using an extension cable.
DC IN 15V jack The AC adaptor connects to this jack. Use only
the model of AC adaptor that comes with the
computer. Using the wrong adaptor can damage
your computer.
S-Video out port This S-Video out port lets you transfer NTSC,
PAL or SECAM data to external devices. Refer to
TV section in Chapter 9, Optional Devices.
D-Video out port This D-Video out port lets you transfer 525i
(480i), 525p (480p), 1125i (1080i) or 750p (720p)
data to external devices. Refer to
TV section in
Chapter 9, Optional Devices.