Toshiba Qosmio G10 User Manual
Page 210
User’s Manual
C-3
Wireless LAN
Wireless IEEE 802.11 Channels Sets (Turbo Mode)
When installing Wireless LAN cards, the channel configuration is managed
as follows:
■
For wireless clients that operate in a Wireless LAN Infrastructure, the
Wireless LAN card will automatically start operation at the channel
identified by the Wireless LAN Access Point. When roaming between
different access points the station can dynamically switch to another
channel if required.
■
For Wireless LAN cards installed in wireless clients that operating in a
peer-to-peer mode, the card will use the default channel 10.
■
In a Wireless LAN Access Point, the Wireless LAN card will use the
factory-set default channel (printed in bold), unless the LAN
Administrator selected a different channel when configuring the
Wireless LAN Access Point device.
Wireless IEEE 802.11 Channels Sets (Revision A)
6
2437
7
2442
8
2447
9
2452
10
2457*
1
11
2462
12
2467*
2
13
2472*
2
Frequency Range
Channel ID
2400-2483.5 MHz
Note
6
2437
US only*
4
Frequency Range
Channel ID
5150-5850 MHz
Note
36
5180
40
5200
44
5220