Software access point, Installing the software access point, For installation in windows nt – Toshiba Magnia Z500 User Manual
Page 19: 1 software access point, 1 installing the software access point, 1 for installation in windows nt
2.1 Software Access Point
This section explains the procedure for installing and uninstalling the MAGNIA Software Access
Point.
If you use the Seamless Office, refer to the user’s guide of the Seamless Office.
2.1.1 Installing the Software Access Point
This section describes the procedure for installing the MAGNIA Software Access Point.
2.1.1.1 For installation in Windows NT
Before starting the installation, check that a wireless LAN card has been mounted.
Refer to the server manual for the mounting procedure.
When a wireless LAN card driver or software for other than this product is installed, uninstall it.
1.
Log on as the user with administrator authority.
2.
Activate Setup.exe in the \Public\LAN\Toshiba\TSAP\AP on the Server Setup Tool CD.
The following screen is displayed. Press the [Next] button.