Toshiba Magnia Z500 User Manual
Page 21
Advertising
Memo
Some protocol components, such as NWLink protocol, demand a setup like a TCP/IP protocol.
Please perform and continue a required setup similarly.
5.
When the installation is completed, the following screen is displayed. Reboot the
system.
6.
Set up the required items in the Access Point Configuration Utility. By the default, WEP
and MAC address filtering are enabled.
[3.2 Access Point Configuration Utility (Local)]
Select the wired LAN network that you want to connect to in the Wired LAN Selection
Utility.
[3.4 Wired LAN Selection Utility]
Advertising